DIVAR IP 7000 (2U) Table of contents | en 3
Bosch Sicherheitssysteme GmbH Installation Manual 2016.07 | V2 | DOC
Table of contents
1
Safety information 5
1.1 Safety message explanation 5
1.2 Safety precautions 5
1.3 Important safety instructions 6
1.4 Electrical safety precautions 8
1.5 ESD precautions 9
1.6 Operating precautions 9
1.7 Notices 9
1.8 FCC and ICES compliance 10
2
About this manual 12
3
System overview 13
3.1 Chassis features 13
3.2 Chassis components 13
3.2.1 Chassis 13
3.2.2 Fans 14
3.2.3 Power supply 14
3.2.4 Air shroud 14
3.2.5 Mounting rails 14
3.3 System interface 14
3.3.1 Control panel buttons 15
3.3.2 Control panel LEDs 15
3.3.3 Drive carrier LEDs 16
4
Rack installation 18
4.1 Unpacking the system 18
4.2 Preparing for setup 18
4.2.1 Choosing a setup location 18
4.2.2 Rack precautions 18
4.2.3 General system precautions 19
4.2.4 Rack mounting considerations 19
4.3 Rack mounting instructions 19
4.3.1 Separating the sections of the rack rails 19
4.3.2 Installing the inner rails on the chassis 20
4.3.3 Installing the outer rails to the rack 21
4.3.4 Installing the chassis in the rack 22
4.3.5 Installing the chassis in a Telco rack 22
4.4 Turning on the system 23
5
System setup - first steps 24
5.1 Introduction 24
5.2 Setup instruction 24
5.3 Starting the application 24
5.4 Using Bosch VMS Config Wizard 25
5.5 Using Bosch VMS Operator Client 26
6
Connecting to the internet 27
6.1 Protecting the system from unauthorized access 27
6.2 Setting up port forwarding 27
6.3 Choosing an appropriate client 27
6.3.1 Remote connection with Operator Client 27
6.3.2 Remote connection with Video Security App 27
To Next Page
Loading...
Need help?
General
Weight and Dimensions
