4/62 Bosch Rexroth AG Linear modules MKK/MKR-xxx-NN-3 | R320103169/2020-08
1 About these instructions
1.1 Validity of the documentation
This documentation applies to the following products:
• Linear modules MKK/MKR/MLR as found in the "Linear modules" catalog.
This documentation is intended for installers, operators and system owners.
This documentation contains important information for the proper and safe installation, operation, maintenance
and disassembly of the product and for troubleshooting simple errors oneself.
X Before commencing any work with the product, be sure to read these Instructions and the "Safety instructions
for linear motion systems" carefully and completely.
1.2 Required and supplementary documentation
Documentation which is indicated by the book symbol must be obtained before handling the product and
must be observed:
Table 1: Required documentation
Title Document number Document type
Safety instructions for linear motion systems R320103152 Safety instructions
Linear modules MKK / MKR / MLR R999000476 Catalog
Rexroth catalogs for drive technology
Product data sheet for Dynalub 510 R310 2052
Safety data sheet for Dynalub 510 R320103160
Product data sheet for Dynalub 520 R310 2053
Safety data sheet for Dynalub 520 R320103161
Instructions for the other components
The Rexroth documentation is availablefor download at www.boschrexroth.com/mediadirectory.
1.3 Presentation of information
To enable users to work rapidly and safely with the product while following these instructions, this
documentation uses standardized safety instructions, symbols, terms and definitions, and abbreviations. These
are explained in the following sections.
1.3.1 Safety instructions in this document
This document contains safety instructions preceding any actions that involve arisk of personal injury or
damage to property. The safety precautions described must be adhered to.
To Next Page
Loading...
Need help?
General
