33
Operation
If no bar is shown, the rechargeable battery charge for the drive
has been used up. The drive will be deactivated. The display and
lighting will be supplied with energy for another 2 hours.
Cycling data
NOTICE: This chapter only applies for the “ActiveLine” and the
“PerformanceLine”.
• Read the current speed shown in the middle of the indicator
(see Figure B-16).
Operating display
Speed
Fig.: B-16 Speed indicator and operating display on the control
computer.
The operating display is a combination of a value and text display
field (see Figure B-16). The following views are available for
selection on the operating display:
- Range: remaining range if conditions remain the same (estimate).
- Distance: the distance covered since the last reset.
- Cycling time: the riding time attained since the last reset.
- Average: the average speed attained since the last reset.
- Maximum: the maximum speed attained since the last reset.
- Time: current time.
- Total distance: Displays the total distance covered with the
e-bike (reset not possible).
• To change the view, push the
button repeatedly until the
desired view appears (see Figure B-17 or Figure B-18).
Fig.: B-17: Control unit with the buttons + (plus), – (minus) and
the
button (only with the “ActiveLine” or “PerformanceLine”).
Optional indicators
NOTICE: This chapter only applies for the “ActiveLine” or
“Performance Line” with the option “Intuvia eShift” and electronic
gear shift.
- Gear (only for models with a “Shimano Di2” gear shift):
Gear indicator.
To Next Page
Loading...
Need help?
General
