VPV Vane Pump 43
VPV 16, Combination pump, S.A.E. ‘A’ flange, RH rotation
IN
OUT
IN
OUT
BOSCH
OUT
IN
BOSCH
VIEW A-A
3.33
(84.6)
3.33
(84.6)
2.61
(66.4)
2.61
(66.4)
0.4
(10.2)
0.4
(10.2)
Optional volume control
(CW rotation reduces flow)
ø0.47
thru, support holes
(ø12.0)
Optional vertical supports
for combination pumps
when rotated 90°
Outlet port,
#12 S.A.E.
Support (Lift) point
3/8"-16UNC-2B X 22.0mm deep
4.81
(122.3)
max.
A
A
9.43
(239.4)
6.96
(176.8)
1.38
(35.0)
0.24
(6.2)
0.44
(11.2)
0.31
(8.0)
6.21
(157.8)
3.19
(81.0)
11.24
(285.4)
10.70
(271.9)
2.66
(67.5)
ø3.25
(ø82.5)
6.21
(157.8)
1.75
(44.5)
1.38
(35.0)
14.07
(357.5)
11.22
(285.0)
9.43
(239.4)
6.96
(176.8)
11.94
(303.4)
12.61
(320.2)
12.61
(320.2)
4.56
(115.8)
3.19
(81.0)
2.80
(71.3)
4.11
(104.5)
5.61
(142.5)
0.83
(21.1)
ø748
(ø19.0)
shaft dia.
4.19
(106.4)
0.43
(11.1)
0.188
square key
(4.8)
S.A.E. "A" 2-bolt
mounting flange
Remote
control
#4 S.A.E.
3.90
(99.0)
Inlet port,
#16 S.A.E.
Case drain port,
#8 S.A.E.
Inlet port,
#16 S.A.E.
Case drain port,
#8 S.A.E.
Support (Lift) point
3/8"-16UNC-2B X 22.0mm deep
1.08
(27.5)
4.65
(118.0)
7.45
(189.2)
1.36
(34.5)
10.80
(274.4)
8.79
(223.3)
4.95
(125.8)
4.18
(106.2)
Optional 2-stage compensator
(now in modular design)
#6 S.A.E.
Shock clipper port. Should
be plumbed to tank
to activate shock clipper
function (See page 97).
2-stage compensator
adjusting knob
(CW rotation increases
pressure setting)
Compensator
adjusting knob
(CW rotation increases
pressure setting)
Standard single
stage compensator