MAKING COPIES 2 - 2
Using the Copy keys
When you want to quickly change the copy settings temporarily for
the next copy, use the temporary Copy keys. You can use different
combinations.
Increasing copy speed or quality
You can select the copy quality. The default setting is Normal.
1
Load your document.
2
Press Copy Quality repeatedly to select the copy quality
(Fast, Normal or Best).
3
Press Mono Start or Colour Start.
—OR—
Press other temporary copy keys for more settings.
These settings are temporary, the machine returns to its default
settings 60 seconds after it finishes copying.
You can save the copy settings you use most often by setting
them as default. (See Changing the default copy settings on
page 2-11.)
Press
Copy Quality
Normal Recommended mode for ordinary
printouts. Good copy quality with
adequate copy speed.
Fast Fast copy speed and lowest ink
consumption. Use FAST to save
time (document to be proof-read,
large documents or many
copies).
Best Use this mode to copy precise
images such as photographs.
BEST uses the highest resolution
and slowest speed.
Temporary Copy keys
To Next Page
Loading...
Need help?
General
