9
The power key (
b
) is located in the top right-hand corner of the keyboard. If batteries
have been installed or the machine has been plugged in using the optional AC adaptor, the
previous session’s information is displayed when the machine is turned on. This feature
allows you to stop work on a label, turn off the machine, and return to it later without having
to re-enter the text.
☞
If you press any key during the opening message, you can skip the message.
The machine will automatically turn off if no key is pressed within 5 minutes. The machine’s
internal memory stores the current session’s information and displays it when you turn on
the machine again.
To turn on the machine:
●
Press b. The previous session’s information appears in the LCD display.
To turn off the machine:
● Press b. The current session’s information is stored in the internal memory.
The machine’s LCD display shows one row of 15 characters; however, the text that you cre-
ate can be up to 60 characters long. You can review and edit your text by using the cursor
keys to move the cursor so that different parts are shown in the display.
LEFT CURSOR KEY
To move the cursor one character to the left:
● Press < once.
To move the cursor several characters to the left:
● Hold down < until the cursor moves to the desired position.
To move the cursor to the beginning of the text line:
● Hold down f and press <.
For Your Information
POWER KEY
CURSOR KEYS
To Next Page
Loading...
Need help?
General