Brother PT-2700 User Manual

LABEL PRINTING
64
Manual Cutting
When using Fabric Tapes or Strong Adhesive Tapes, set "On" for Manual Cutting
before printing. After printing, remove the tape cassette from the machine and use
scissors to cut the tape.
Press the key to display the setup menu, select
"Special Tape" using the or keys, and then
press the or key.
Select the value by using the or keys.
Press the or key to apply the setting.
You can adjust the accuracy of the printed label length in increment of -5 to +5.
Press the key. The current settings are
displayed.
Select "Adjust Length." by using the or keys,
and then set the value by using the or keys.
Press the or key to apply the setting.
Manual Cutting
1
2
3
• Press the key to return to the previous step.
• Press the key to set the value to its default setting ("Off").
Adjusting the Label Length Accuracy
1
2
3
• Press the key to return to the previous step.
• Press the key to set the value to default setting.
• Approximately 1% of the total label length will be adjusted by 1 level.

Brother PT-2700 Specifications

General

Model	PT-2700
Print Technology	Thermal Transfer
Maximum Print Resolution	180 dpi
Maximum Print Speed	10 mm/sec
Keyboard	QWERTY
Cutter	Automatic
Tape Widths	6mm, 9mm, 12mm, 18mm
Display	16 characters x 3 lines
Connectivity	USB
Power Source	AC adapter
Styles	Normal, Bold, Outline, Shadow, Italic
Label Cassette	24mm
Type	Desktop Label Maker