56 Video
Advanced Functions
Shooting Video in y Manual Mode
When the mode switch is set to y (Manual mode), you can enjoy full
access to the menus and manually adjust the exposure, focus, white
balance and many more of the camcorder's settings to your prefer-
ence. Even in mode, though, the camcorder can help you with
the settings. For example, by using Special Scene recording programs
(0 58).
1 Set the mode switch to y.
2 Turn on the camcorder.
By default, movies are recorded in
the built-in memory (c only)
or on memory card X (d). You
can select the memory that will be
used to record movies (0 35).
3 Press
g to begin
recording.
Press
g again to pause the
recording.
IMPORTANT
• Observe the following precautions while the ACCESS indicator is on or
flashing. Failing to do so may result in permanent data loss or damage
to the memory.
- Do not open the double memory card slot cover.
- Do not disconnect the power source or turn off the camcorder.
- Do not change the camcorder’s operating mode.
• Be sure to save your recordings regularly (0 126), especially after
making important recordings. Canon shall not be liable for any loss or
corruption of data.
Operating modes:
To Next Page
Loading...
Need help?
General
