Video 87
Connect the optional ZR-2000 or ZR-
1000 Zoom Remote Controller to the
REMOTE terminal on the camcorder.
For details about using the zoom remote
controller, refer to the instruction manual
of the ZR-2000 or ZR-1000.
NOTES
• In mode, the only available functions are turning the power on/off,
starting/stopping a recording, and zoom.
Selecting the Playback Starting Point
If you have a very long scene, you may want to start playing back the
scene from a certain point. You can use the movie timeline to break the
scene to segments at fixed time intervals ranging from 6 seconds to 6
minutes. If you recorded movies using face detection (0 64), you can
display the scene divided into segments every time the camcorder reg-
istered a change in the main subject of the scene.
1 Open the [Original] or [Playlist] index screen.
Functions Available with the Zoom Remote Controller
Using the ZR-2000 or ZR-1000: turning the power on/off, starting/
stopping a recording, zoom, focus adjustment and displaying on-
screen displays on an external monitor.
Using the ZR-2000 only: switching between autofocus and manual
focus, Push AF*, focus assistance (MAGNIFYING button), and peaking
(PEAKING button).
* The Push AF function allows you to switch to autofocus temporarily during
manual focus.
ZR-2000
Operating modes:
To Next Page
Loading...
Need help?
General
