Canon 8406B001 User Manual

188
1
2
3
4
5
6
7
8
9
10
Cover
Before Use
Common Camera
Operations
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting
Modes
Tv, Av, M, C1,
and C2 Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Basic Guide
P Mode
Cannot send images.
• Thedestinationdevicehasinsufcientstoragespace.Increasethestoragespaceon
the destination device and resend the images.
• The write-protect tab of the memory card in the destination camera is set to the
locked position. Slide the write-protect tab to the unlocked position.
• RAW images cannot be sent. In [
] mode, only the JPEG images are sent.
• Images cannot be sent to CANON iMAGE GATEWAY or other Web services if you
moveorrenameimagelesorfoldersonthecomputerthatreceivedimagessent
using Image Sync via an access point (= 145). Before moving or renaming these
imagelesorfoldersonthecomputer,makesuretheimageshavealreadybeensent
to CANON iMAGE GATEWAY or other Web services.
Cannot resize images for sending.
• Images cannot be resized to be bigger than the resolution setting of their original size.
• Movies cannot be resized.
Images take a long time to send./The wireless connection is disrupted.
• Multiple images may take a long time to send. Try resizing the image to [ ] or [ ]
to reduce sending time (=
142).
• Movies may take a long time to send.
• Do not use the camera near sources of Wi-Fi signal interference, such as microwave
ovens,Bluetoothdevices,orotherequipmentoperatingonthe2.4GHzband.Note
that images may take a long time to send even when [
] is displayed.
• Bring the camera closer to the other device you are trying to connect to (such as the
access point), and make sure there are no objects between the devices.
• When sending images to a computer from a memory card with a large amount
of images (approximately 1,000), the connection may be disrupted. Import any
necessary images to a computer, and then reduce the number of images on the
memory card by erasing unnecessary images.
Want to erase Wi-Fi connection information before disposing of the
camera or giving it to someone else.
• Reset the Wi-Fi settings (= 148).
On-Screen Messages
If an error message is displayed, respond as follows.
No memory card
• The memory card may be inserted facing the wrong way. Reinsert the memory card
facing the correct way (=
13).
Memory card locked
• The write-protect tab of the memory card is set to the locked position. Switch the
write-protect tab to the unlocked position (=
13).
Cannot record!
• Shooting was attempted without a memory card in the camera. To shoot, insert a
memory card facing the correct way (=
13).
Memory card error (= 154)
• If the same error message is displayed even after you have formatted a supported
memory card (=
2) and have inserted it facing the correct way (= 13), contact
a Canon Customer Support Help Desk.
Insufcientspaceoncard
• There is not enough free space on the memory card to shoot ( = 29, 51, 67, 91)
or edit images (
= 118 – 121). Either erase unneeded images ( = 114) or insert a
memory card with enough free space (
= 13).
Charge the battery (= 12)
No Image.
• The memory card does not contain any images that can be displayed.
Protected! (= 111)
UnidentiedImage/IncompatibleJPEG/Imagetoolarge./Cannotplay
back MOV
• Unsupported or corrupt images cannot be displayed.
• It may not be possible to display images that were edited or renamed on a computer,
or images shot with another camera.

Canon 8406B001 Specifications

General

Brand	Canon
Model	8406B001
Category	Digital Camera
Language	English