1. Make sure the camera is set to record pause mode in the Q
(program AE) mode.
2. Press the selector dial in and choose AUTO from the program
menu.
3. Open the camera menu and point the arrow at SHUTTER.
4. Select the desired shutter speed and press the selector dial in.
5. Close the menu.
• The camera returns to the auto shutter setting when you slide the program
selector away from the Q setting, or change the recording program.
Shutter speed
(see p. 30)
Set the shutter speed manually to take stable shots of quickly moving subjects.
Using the Full
Range of Features
58
E
Notes:
• You cannot adjust the exposure without the e mark before E.LOCK in the
display. Push the EXP button so that e appears before E.LOCK. Then you can
adjust the exposure manually.
• The standard exposure level depends on which recording program you have
selected.
• Exposure lock is canceled if you change recording programs.
• You cannot use exposure lock or adjustment when the program selector is set to
the [ (Easy Recording) position.
• If you zoom while the exposure is locked, the brightness of the scene may
change.
To Next Page
Loading...
Need help?
General
