8
E
Mastering
the Basics
Powering Your Camcorder
Before operating your camera, you will need to use the power adapter to:
provide power from an AC outlet or charge battery packs
Notes:
• The power adapter converts current from a household power socket (100–240 V
AC, 50/60 Hz) to the DC current used by your camera.
• If the adapter is used next to a TV, it may cause the TV to emit noise — move
the adapter away from the TV or the antenna cable.
Connecting the camera to an AC outlet
Use the power adapter and the DC coupler to provide your camera with instant
power from an AC outlet.
1. Press the BATT RELEASE button and remove the terminal cover.
2. Align the end of the DC coupler with the BATTERY line on the
camera. Attach the DC coupler so that it clicks into place.
3. Connect the DC coupler to the adapter.
4. Connect the power cable to the adapter.
5. Plug the power cable into an AC outlet.
6. Remove the DC coupler after use.
• Press the BATT RELEASE button and remove the coupler.
• Always turn the camera off before removing the power source.
To Next Page
Loading...
Need help?
General
