69
E
Editing
Using the Dubbing Function for the First Time
When you use the dubbing function for
the first time, or with a different VCR,
you should set your camcorder to send
the correct remote control signals to
your VCR.
The camera will not forget this setting
unless you change it. Do not alter it
again unless you change VCR.
Preparations & setting up
1. Make sure that the camera and VCR are set up as in “Preparing
for Dubbing,” p. 67 and “Setting the camera to control your VCR,”
p. 68.
2. Open the VCR menu and select
\REC.SET UP.
• This takes you to the REC.SET UP menu.
• It is easiest to view the menu on the TV screen.
3. Point the arrow to RECORDER and push the selector dial.
• You are now unable to use the wireless controller (B appears in the
display).
To Next Page
Loading...
Need help?
General
