18
Installing the Batteries
The camera uses two lithium CR123A (or DL123A) batteries.
1
Open the battery compartment
cover.
•
Slide the release lever as shown by
the arrow and open the cover.
2
Install the batteries.
•
Make sure the battery contacts (+
and –) are properly oriented as
shown.
•
Do not mix old and new batteries.
3
Close the battery compartment
cover.
•
Press the cover until it snaps shut.
1
2
For places where CR123A (or DL123A) batteries may not be easily available,
take spare batteries with you. Also carry spare batteries for extended shooting
sessions.
∗ In the Americas, batteries are not included with the camera.
+
--
To Next Page
Loading...
Need help?
General
