39
While you press the shutter
button halfway, the camera
focuses continuously
•
This AF mode suits moving subjects
when the focusing distance keeps
changing.
s
With predictive AF
∗
, the camera can
also focus track a subject which
steadily approaches or retreats from
the camera.
s
The exposure settings are set
immediately before the picture is
taken.
If focus has not been achieved, the focus confirmation light <n> in the
viewfinder will blink. In this case, you cannot take a picture even when you
press the shutter button fully. Recompose the shot and try and focus again.
Also see “When Autofocus Fails” (p.51).
AI Servo AF for Moving Subjects
One-Shot AF for Still Subjects
Pressing the shutter button
halfway activates AF operation
and achieves focus once.
s
The AF point which achieves focus
will flash briefly and the focus
confirmation light in the viewfinder will
light at the same time.
s
With evaluative metering, the
exposure setting (shutter speed and
aperture value) will be set when focus
is achieved. The exposure setting and
focus will be locked as long as the
shutter button is pressed halfway.
(p.50) You can then recompose the
shot while retaining the exposure
setting and point of focus.
AF point Focus
confirmation light
To Next Page
Loading...
Need help?
General
