12-11
Machine Settings
FAX SETTINGS
3. TX SETTINGS Sets the transmission features.
1. AUTO REDIAL Sets whether to redial automatically when the other line is busy
or a transmission error occurs. (See Chapter 4, “Sending and
Receiving,” in the Reference Guide.)
ON Customizes the redial operation.
REDIAL TIMES Sets the number of retries. (1TIMES–10TIMES (2TIMES))
REDIAL INTERVAL Sets period of time before redialing. (2MIN.–99MIN. (2MIN.))
OFF After the first attempt at dialing fails, redialing is not attempted.
2. DIALING LINE CHCK Sets whether to check the telephone line condition.
OFF
ON
–
–
4. RX SETTINGS Sets the reception features.
1. FAX/TEL OPT. SET Sets the optional items in the <FAX/TEL> mode. (See Chapter 4,
“Sending and Receiving,” in the Reference Guide.)
RING START TIME Sets the time the machine takes to check whether a call is a fax
or a voice call. (4SEC–30SEC (6SEC))
F/T RING TIME Sets the ring length for voice calls. (10SEC–45SEC (22SEC))
F/T SWITCH ACTION Selects whether the machine switches to the receive mode after
the ring time has elapsed, or whether if disconnects the call.
RECEIVE
DISCONNECT
–
–
To Next Page
Loading...
Need help?
General