Canon ImageCLASS MF4270 User Manual

12-13
Machine Settings
FAX SETTINGS
6. RX TERMINAL ID Sets whether to insert the machine’s fax number and the sender
information on received faxes.
OFF
ON
–
–
7. RX RESTRICTION You can reject faxes from senders with no fax/telephone
number in their sender information. (See Chapter 4, “Sending
and Receiving,” in the Reference Guide.)
OFF All receptions are conducted.
ON Receives the fax only from the sending fax machine that sends
the TSI signal.
5 PRINTER SETTINGS Sets the printer functions.
1. RX REDUCTION Sets whether to reduce or truncate the image when a faxed
page is larger than the size of paper loaded. (See Chapter 4,
“Sending and Receiving,” in the Reference Guide.)
ON Reduces the image to fit on the size of paper loaded.
OFF Retains the original size of the image.
CUT The image that is larger than 1-page record area is cut and not
recorded.
2. 2-SIDED PRINT Sets the type of two-sided printing for faxing. (See Chapter 4,
“Sending and Receiving,” in the Reference Guide.)
OFF
ON
–
–
3. CONT. PRINTING Sets whether to continue printing when toner has run out. This
function is only for printing fax documents and reports. (See
Chapter 4, “Sending and Receiving,” in the Reference Guide.)
OFF
ON
–
–

Canon ImageCLASS MF4270 Specifications

General

Print Technology	Laser
Duplex Printing	Manual
Connectivity	USB 2.0
Scan Resolution	600 x 600 dpi
Copy Resolution	600 x 600 dpi
Fax Speed	33.6 Kbps
Memory	32 MB
Functions	Print, Copy, Scan, Fax
Automatic Document Feeder (ADF)	Yes, 35 sheets
Fax Transmission Speed	3 seconds per page
Print Resolution	600 x 600 dpi
Paper Capacity	250-sheet cassette
Scanner Type	Flatbed
Input Paper Size	Letter, Legal, A4, A5, B5
Output Paper Size	Letter, Legal, A4, A5, B5
Print Speed	Up to 21 ppm (Letter)
Copy Speed	Up to 21 cpm (Letter)