Canon imagePROGRAF iPF6350 Basic Guide No.3 User Manual

Messages regarding ink
Ink insufficient. ................................................................................................................................................ 989
No ink left. ....................................................................................................................................................... 989
Remaining level of the ink cannot be correctly detected. ................................................................................ 989
Close Ink Tank Cover ...................................................................................................................................... 990
Not much ink is left. ......................................................................................................................................... 990
No ink tank loaded. .......................................................................................................................................... 990
Wrong ink tank. ............................................................................................................................................... 991
Ink insufficient.
Cause Corrective Action
The ink level is low, so you cannot print, clean the Printhead, or do other opera-
tions that require ink.
Press ▲ or ▼ to select Rep. Ink
Tank, and then press the OK but-
ton. Replace the Ink Tank that is
low with a new Ink Tank.
(See "Replacing Ink Tanks.")
→P.900
Press ▲ or ▼ to select Continue
to print, and then press the OK
button to resume printing. Howev-
er, note that this error may affect
the printing quality.
If the printer is in Standby mode,
press the OK button and replace
the Ink Tank that is low with a new
Ink Tank.
(See "Replacing Ink Tanks.")
→P.900
No ink left.
Cause Corrective Action
There is no ink left. Open the Ink Tank Cover and replace the Ink Tank for which the Ink Lamp is flashing.
(See "Replacing Ink Tanks.") →P.900
Remaining level of the ink cannot be correctly detected.
Cause
Corrective Action
Ink level detection cannot work cor-
rectly if you use refill ink tanks.
The refill ink tank can no longer be used. See the section Ink level detection
and take the appropriate action. (See "Ink Level Detection.") →P.971
Error Message > Messages regarding ink >
iPF6300 Ink insufficient.
12
989

Canon imagePROGRAF iPF6350 Basic Guide No.3 Specifications

General

Brand	Canon
Model	imagePROGRAF iPF6350 Basic Guide No.3
Category	Printer
Language	English