Cause Corrective Action
The type of paper specified in the
printer driver does not match the
type loaded in the printer.
1.
Press the Stop button and stop printing.
2.
Change the type of paper in the printer driver and try printing again.
The blue Switch on the platen is
set incorrectly.
Move the Switch numbered corresponding to the size of paper for printing opposite to the ●
position.
(See "Setting the Blue Switch on the Platen.") ➔User's Guide
Lines are misaligned
Lines are misaligned
Cause Corrective Action
The Printhead alignment is not ad-
justed.
Adjust the Printhead alignment.
(See "Automatic Adjustment to Straighten Lines and Colors.") ➔ P.92
(See "Manual Adjustment to Straighten Lines and Colors.") ➔ User's Guide
(See "Adjusting Line Misalignment.") ➔ User's Guide
The type of paper specified in the
printer driver does not match the
type loaded in the printer.
Load paper of the same type as you have specified in the printer driver.
(See "Loading Rolls in the Printer.") ➔ P.15
(See "Loading Sheets in the Printer.") ➔ P.25
Make sure the same type of paper is specified in the printer driver as you have loaded in the
printer.
1.
Press the Stop button and stop printing.
2.
Change the type of paper in the printer driver and try printing again.
Lines are misaligned
iPF840 Series
Basic Guide
Troubleshooting Problems with the printing quality
116
To Next Page
Loading...
Need help?
General