Messages regarding HP-GL/2
Messages regarding HP-GL/2
This type of paper is not compatible with HP-GL/2. ...................................................................................... 143
GL2: Wxxxx The memory is full. (xxxx is 0501, 0903, or 0904) ...................................................................... 143
GL2: W0502 The parameter is out of range. ................................................................................................. 143
GL2: W0504 This command is not supported. .............................................................................................. 143
This type of paper is not compatible with HP-GL/2.
This type of paper is not compatible with HP-GL/2.
Cause Corrective Action
The printer has received a HP-GL/2 print
job that cannot be printed on the paper
that has been advanced.
Follow these steps to replace the type of paper in the printer.
1.
Press ▲ or ▼ to select Change Paper, and then press the OK button.
2.
Replace the paper with a type compatible with HP-GL/2. For details on paper com-
patible with HP-GL/2, refer to the Paper Reference Guide.
(See "Displaying the Paper Reference Guide.") ➔ User's Guide
Press ▲ or ▼ to select Stop Printing, and then press the OK button.
Press ▲ or ▼ to select Print, and then press the OK button to resume printing. Howev-
er, note that this error may cause paper jams and affect the printing quality.
GL2: Wxxxx The memory is full. (xxxx is 0501, 0903, or 0904)
GL2: Wxxxx The memory is full. (xxxx is 0501, 0903, or 0904)
Cause Corrective Action
The printer memory is
full.
Because the entire print job could not be received, the printer may not be able to print the entire original.
Check the printing results.
In the Control Panel menu, setting On-the-Fly to On may enable printing. However, check the printing
results because the image may be incomplete in some cases.
GL2: W0502 The parameter is out of range.
GL2: W0502 The parameter is out of range.
Cause Corrective Action
A parameter specified in a HP-GL/2 command is out of the suppor-
ted range.
Check the print job.
If you have specified ProcessingOption > Warning > On in
the Control Panel menu, set it to Off instead.
GL2: W0504 This command is not supported.
GL2: W0504 This command is not supported.
Cause Corrective Action
The printer has received an unsupported HP-GL/2 com-
mand.
Check the print job.
If you have specified ProcessingOption > Warning > On in the
Control Panel menu, set it to Off instead.
iPF840 Series
This type of paper is not compatible with HP-GL/2.
Basic Guide
Error Message Messages regarding HP-GL/2
143
To Next Page
Loading...
Need help?
General