Canon imageRUNNER 2202N User Manual

10 Installation Location and Handling
Provide Adequate Installation Space
Provide enough space on each side of the machine for
unrestricted operation.
For the imageRUNNER 2202N/2002N:
• When the feeder (DADF-AM1) is attached:
100 mm or more
1,285 mm
533 mm
1,022.9 mm
For the imageRUNNER 2002:
100 mm or more
1,285 mm
533 mm
1,022.9 mm
Handling Precautions
• Do not attempt to
disassemble or modify the
machine.
• Some parts inside the machine are subject to high-
voltages and temperatures. Take adequate precautions
when inspecting the inside of the machine. Do not
carry out any inspections that are not described in the
manuals for this machine.
• Be careful not to spill
liquid or drop any foreign
objects, such as paper
clips or staples inside
the machine. If a foreign
object comes into
contact with electrical
parts inside the machine,
it might cause a short
circuit and result in a fire
or electrical shock.
• If there is smoke, or unusual noise, immediately turn
the main power switch OFF, disconnect the power
cord from the power outlet, and then call your local
authorized Canon dealer. Using the machine in this
state may cause a fire or electrical shock. Also, avoid
placing objects around the power plug so that the
machine can be disconnected whenever necessary.

Canon imageRUNNER 2202N Specifications

General

Print Technology	Laser
Functions	Print, Copy, Scan
Duplex Printing	Manual
Copy Resolution	600 x 600 dpi
Type	Laser
Print Speed	22 ppm
Paper Capacity	250 sheets
Paper Input	250-sheet cassette, 1-sheet manual feed tray
Paper Output	100 sheets (face down)
Paper Sizes	A4, A5, B5
Copy Speed	Up to 22 cpm (A4)
Multiple Copy	Up to 99 copies
Zoom	25 - 400%
Scan Resolution	600 x 600 dpi
Scan Speed	Up to 22 ipm
Interface	USB 2.0, Ethernet
Network Protocol	TCP/IP
Power Consumption	Approx. 1.2 kW
Network Connectivity	Ethernet 10/100Base-TX
Supported Operating Systems	Windows, Mac, Linux
Warm-up Time	Less than 15 seconds