Canon imageRUNNER 2202N User Manual

37Operating the Machine from a Computer (Remote UI) (For the imageRUNNER 2202N/2002N)
Operating the Machine from a Computer (Remote UI)
(For the imageRUNNER 2202N/2002N)
The Remote UI (User Interface) is preinstalled software in the machine that enables you to access the
machine's functions by using your computer's Web browser. For example, the Remote UI enables you to
access the machine to check job status, execute jobs, and specify various settings. For more details, see
e-Manual > Remote UI.
NOTE
• This function can only be used with the imageRUNNER 2202N/2002N.
• To log in as the administrator using the Remote UI, you must specify the network connection settings in advance. For
instructions on specifying the network connection settings, see e-Manual > Before You Start Using This Machine.
• For information on necessary system environment and preparation to start the Remote UI, see e-Manual > Remote
UI.
01 Start the Web browser on your
computer.
02 Enter 'http://<IP address or host name
of the machine>' in [Address].
03 Enter the System Manager ID and
System Manager PIN → click [Log In].
You are now logged in to the machine as an
administrator.
To login as a end user, click [End-User Mode].
If a login service such as Department ID Management
has been set, enter the appropriate login information.
04 Check the job status and specify the
settings.
■ To check the job status:
• Click [Status Monitor/Cancel].
■ To specify the settings:
• Click [Settings/Registration].

Canon imageRUNNER 2202N Specifications

General

Print Technology	Laser
Functions	Print, Copy, Scan
Duplex Printing	Manual
Copy Resolution	600 x 600 dpi
Type	Laser
Print Speed	22 ppm
Paper Capacity	250 sheets
Paper Input	250-sheet cassette, 1-sheet manual feed tray
Paper Output	100 sheets (face down)
Paper Sizes	A4, A5, B5
Copy Speed	Up to 22 cpm (A4)
Multiple Copy	Up to 99 copies
Zoom	25 - 400%
Scan Resolution	600 x 600 dpi
Scan Speed	Up to 22 ipm
Interface	USB 2.0, Ethernet
Network Protocol	TCP/IP
Power Consumption	Approx. 1.2 kW
Network Connectivity	Ethernet 10/100Base-TX
Supported Operating Systems	Windows, Mac, Linux
Warm-up Time	Less than 15 seconds