Canon imageRUNNER 2202N User Manual

30 Placing Originals
Placing Originals
Place your originals on the platen glass or into the feeder, depending on the size and type of the original, and
the copy modes you want to use.
NOTE
The optional feeder (DADF-AM1) can only be attached to the imageRUNNER 2202N/2002N.
Orientation
You can place an original either vertically or horizontally.
Always align the top edge of your original with the back
edge of the platen glass (by the arrow in the top left
corner), or with the back edge of the feeder.
■ Platen Glass
■ Feeder (imageRUNNER 2202N/2002N Only)
Platen Glass
You should use the platen glass when copying bound
originals (such as books and magazines), heavy or
lightweight originals, and transparencies. When copying
ID cards using the ID Card Copy function, you must use
the platen glass.
01 Lift the feeder/platen cover.
02 Place your original face down.
The original that you want to copy must be placed face
down. Align the top edge of your original with the back
edge of the platen glass (by the arrow in the top left
corner).

Canon imageRUNNER 2202N Specifications

General

Print Technology	Laser
Functions	Print, Copy, Scan
Duplex Printing	Manual
Copy Resolution	600 x 600 dpi
Type	Laser
Print Speed	22 ppm
Paper Capacity	250 sheets
Paper Input	250-sheet cassette, 1-sheet manual feed tray
Paper Output	100 sheets (face down)
Paper Sizes	A4, A5, B5
Copy Speed	Up to 22 cpm (A4)
Multiple Copy	Up to 99 copies
Zoom	25 - 400%
Scan Resolution	600 x 600 dpi
Scan Speed	Up to 22 ipm
Interface	USB 2.0, Ethernet
Network Protocol	TCP/IP
Power Consumption	Approx. 1.2 kW
Network Connectivity	Ethernet 10/100Base-TX
Supported Operating Systems	Windows, Mac, Linux
Warm-up Time	Less than 15 seconds