9-5
Machine Settings
ADJUST./CLEANING
Setting Item Description
1 FIX.UNIT CLEANING Cleans the fuser roller. (See “Fuser Roller,” on p. 7-5.)
2 SPECIAL MODE T Sets whether to prevent blur from appearing on the
printouts.
When this setting is set to <on>, the density of printouts may
become light.
–OFF
–ON
3 SPECIAL MODE U Select to improve print quality in high temperature and high
humidity conditions or in low temperature and low humidity
conditions.
OFF Select in normal condition.
MODE1 Select to improve print quality in low temperature and low
humidity conditions, or when using thick paper or an
envelope.
MODE2 Select to improve print quality in high temperature and high
humidity conditions.
4 SPECIAL MODE V Sets whether to prevent small size paper (B5, A5,
EXECUTIVE, etc) from being curled.
–OFF
–ON
5 SPECIAL MODE Y Sets to enhance the fixing characteristics of toner under the
conditions of a low temperature environment When this
setting is set to <ON>, first copy time and the time to resume
from the sleep mode may take longer.
–OFF
–ON
To Next Page
Loading...
Need help?
General
