115
E
Editing
Playing Back the Added Sound
You can select to play back Stereo 1 (original sound), Stereo 2 (added sound), or adjust
the balance of both sounds.
1. Press the MENU button and select [AUDIO SETUP]. Select [12bit
AUDIO], select a setting and press the MENU button.
• STEREO1: Plays back the original sound.
• STEREO2: Plays back the added sound.
• MIX/FIXED: Plays back Stereo 1 and Stereo 2 in the same level.
• MIX/VARI.: Plays back Stereo 1 and Stereo 2. The mix balance can be adjusted.
2. If you have selected [MIX/VARI.], adjust the mix level: Press the MENU
button and select [AUDIO SETUP]. Select [MIX BALANCE], adjust the
balance with the SET dial and press the MENU button.
Turn the SET dial down to increase the volume of Stereo 1 and up to increase the
volume of Stereo 2.
The camcorder resets to [STEREO1] when you turn the camcorder off. However,
the mix balance is memorized by the camcorder.
CAMERA
PLAY (VCR)
CARD CAMERA CARD PLAY
MENU
(70)
AUDIO SETUP 12bit AUDIO
•••
STEREO1
To Next Page
Loading...
Need help?
General
