131
Transferring Images
E
Transferring Images
Transferring Memory Card Images to a
Computer
With the supplied USB cable and Digital Video Software, you can browse and archive
images or arrange still images for printout. For details, refer to the Digital Video Software
Instruction Manual.
Users of Windows OS can also transfer images to the computer by simply pressing the
(print/share) button ( 132).
Do not disconnect the USB cable, open the memory card cover, remove the
memory card, change the position of the TAPE/CARD switch or turn off the
camcorder and computer while data is being transferred to the computer (while
the camcorder’s card access indicator is flashing). Doing so may damage the
memory card’s data.
Operation may not work correctly depending on the software and the
specifications/settings of your computer.
The image files on your memory card and the image files saved on the hard
disk drive of your computer are valuable, original data files. If you wish to use
image files on your computer, make copies of them first, and use the copied file,
retaining the original.
Make sure that camcorder and computer are not connected with a DV cable
before connecting the camcorder to the computer using the USB cable.
Otherwise, the computer may not operate properly.
We recommend powering the camcorder from a household power source while
it is connected to the computer.
Refer also to the computer instruction manual.
Users of Windows XP and Mac OS X:
Your camcorder is equipped with the standard Picture Transfer Protocol (PTP)
allowing you to download still images (JPEG only) by simply connecting the
camcorder to a computer via USB cable without installing the software from the
DIGITAL VIDEO SOLUTION DISK.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
