Canon MVX330i User Manual

66
Using the Multi-Image Screen
You can operate the multi-image screen only in the following playback modes:
- When [M.S.SPEED] is set to [MANUAL]: Playback pause, slow forward/reverse
playback
- When [M.S.SPEED] is set to [FAST], [MODERATE] or [SLOW]: Playback pause
In CAMERA mode, set the program selector to .
1. Open the menu and select [D.EFFECT SETUP].
2. Select [D.E.SELECT] and set it to [MULTI-S].
3. Select [M.S.SPEED] and select the transition speed.
Following transition speeds can be selected: fast (every 4
frames), moderate (every 6 frames*), slow (every 8 frames*).
* In Low Light mode: moderate (every 8 frames), slow (every 12 frames).
4. Select [M.S.SPLIT], select the number of sequences and close the
menu.
“MULTI-S” flashes.
5. Press the D.EFFECTS button.
• MANUAL: Images will be captured each time you press the
D.EFFECTS button. The blue frame indicating the next
sequence disappears after the last image. Pressing the
D.EFFECTS button for more than 1 second cancels the
images one after another.
• FAST, MODERATE, SLOW: The set number of images will be captured at the set
speed. To cancel the multi-image screen, press the D.EFFECTS button.
6. Press the start/stop button to begin recording.
The multi-image screen is recorded on the tape.
CAMERA PLAY (VCR)
CARD CAMERA CARD PLAY

Canon MVX330i Specifications

General

Digital zoom	360 x
Optical zoom	18 x
Image stabilizer	Yes
Focal length range	45.4 - 817 mm
Sensor type	CCD
Total megapixels	1.33 MP
Optical sensor size	1/4.5 \
Display diagonal	2.5 \
Resolution	1280 x 960 pixels
Minimum illumination	0 lx

Weight and Dimensions

Depth	78 mm
Width	72 mm
Height	131 mm
Weight	500 g