Canon MVX330i User Manual

136
Additional Information
About the NETWORK Mode
(DV Messenger Version2)
With the Windows XP dedicated DV Network Software (DV Messenger), you can operate
your camcorder from the computer, perform videoconferences using the camcorder or
remotely access the camcorder at home using the Internet.
Download the DV Messenger and the DV Network Software Instruction Manual from the
following homepage. Refer to the DV Network Software Instruction Manual for details.
www.canon-europe.com/DVmessenger
www.canon.com.au/products/cameras.html
www.canon.com.cn/down/static/driverflistview.html
www.canon-asia.com
Preparations
1. Install DV Messenger.
2. Connect the power adapter to the camcorder.
3. Press the UNLOCK button and turn the POWER
switch to NETWORK.
4. Connect the camcorder to the computer using a DV
cable.
• “NETWORK MODE” appears on the camcorder screen.
5. Start DV Messenger.
Before connecting the camcorder to the computer using a DV cable, make sure
that camcorder and computer are not connected with a USB cable, and that no
other 1394 device is connected to the computer.
 In NETWORK mode, the camcorder can only be operated from the computer,
except for the following functions:
- When the DV Messenger [CAMERA] control panel is displayed: Zoom and
focus (when DV Messenger set to autofocus)
- When the DV Messenger [VCR] control panel is displayed: Volume
adjustment of the built-in speaker
 Following functions cannot be used with DV Messenger.
- Image stabilizer
-Digital zoom
-Flash
 The camcorder cannot be operated with the wireless controller.

Canon MVX330i Specifications

General

Digital zoom	360 x
Optical zoom	18 x
Image stabilizer	Yes
Focal length range	45.4 - 817 mm
Sensor type	CCD
Total megapixels	1.33 MP
Optical sensor size	1/4.5 \
Display diagonal	2.5 \
Resolution	1280 x 960 pixels
Minimum illumination	0 lx

Weight and Dimensions

Depth	78 mm
Width	72 mm
Height	131 mm
Weight	500 g