Canon PowerShot A1200 User Manual

113
You can magnify the area of a recorded image that was inside the AF Frame
to check the focus.
Press the l button to switch to
the focus check display (p. 43).
z For images with detected faces, you can
also switch to the focus check display by
pressing the 0 button.
X A white frame will appear where the AF
frame was when the focus was set.
X A gray frame will appear on a face
detected during playback.
X The area within the orange frame appears
magnified.
Switch frames.
z Move the zoom lever toward k once.
X The screen shown on the left will appear.
z Press the 0 button to switch between
frames on detected faces. Press the m
button to move to other frames.
Change the magnification level or
location.
z Use the zoom lever to change the display
size, and the opqr buttons to change
the display position while checking the
focus.
z Press the n button to reset the
display to Step 1.
Checking the Focus
The focus check display is not available for movies.
COPY

Canon PowerShot A1200 Specifications

General

Sensor	1/2.3-inch CCD
Optical Zoom	4x
Digital Zoom	4x
Image Processor	DIGIC 4
LCD Resolution	230, 000 dots
ISO Range	80 - 1600
Shutter Speed	15-1/2000 sec
Aperture Range	f/2.8-f/5.9
Battery	2x AA batteries
Lens	5.0-20.0mm f/2.8-5.9
Display	2.7-inch LCD
Viewfinder	Optical
Video Recording	720p HD
Focus Range	3 cm (1.2 in.) - infinity (W), 50 cm (1.6 ft.) - infinity (T)
Storage	SD/SDHC/SDXC
Weight	185g (including batteries)