Canon PowerShot A1200 User Manual

Changing Image Transitions
115
Choose an image.
z Press the opqr buttons to choose the
image you want to view next.
X The chosen image will be displayed in the
middle, and the next four possibilities will
appear.
z Press the m button to display the middle
image at full size. Press the m button
again to restore the original display.
z Press the n button to restore single
image playback.
You can choose from 3 transition effects when switching between images in
single image playback.
Choose [Transition].
z Press the n button to choose
[Transition] from the 1 tab, then press the
qr buttons to choose a transition effect.
• Only still images shot with this camera will play back in Smart Shuffle.
• Smart Shuffle is not available in the following situations:
- If there are less than 50 images taken with this camera on the memory card
- If you play back images not supported by Smart Shuffle
- During filtered playback
Changing Image Transitions
COPY

Canon PowerShot A1200 Specifications

General

Sensor	1/2.3-inch CCD
Optical Zoom	4x
Digital Zoom	4x
Image Processor	DIGIC 4
LCD Resolution	230, 000 dots
ISO Range	80 - 1600
Shutter Speed	15-1/2000 sec
Aperture Range	f/2.8-f/5.9
Battery	2x AA batteries
Lens	5.0-20.0mm f/2.8-5.9
Display	2.7-inch LCD
Viewfinder	Optical
Video Recording	720p HD
Focus Range	3 cm (1.2 in.) - infinity (W), 50 cm (1.6 ft.) - infinity (T)
Storage	SD/SDHC/SDXC
Weight	185g (including batteries)