Canon PowerShot A1200 User Manual

93
While the shutter button is pressed halfway, the focus and exposure will
continue to adjust, allowing you to take pictures of moving subjects without
missing a shot.
Choose [Servo AF].
z Press the n button to choose [Servo
AF] from the 4 tab, then press the qr
buttons to choose [On].
Focus.
z The focus and exposure will be maintained
where the blue AF frame appears while
you press the shutter button halfway.
Shooting with Servo AF
• The camera may not be able to focus in some conditions.
• In low light conditions, AF frames may not turn blue even after pressing
the shutter button halfway. In this case, you can set the focus and
exposure with the AF frame setting.
• If a correct exposure cannot be obtained, the shutter speed and aperture
value appear in orange. Release your finger from the shutter button, then
press it again halfway.
• You cannot shoot with the AF lock in this mode.
• The [AF-Point Zoom] option in the 4 tab is not available in Servo AF
mode.
• Not available when using the self-timer (pp. 58, 59, 60).
COPY

Canon PowerShot A1200 Specifications

General

Sensor	1/2.3-inch CCD
Optical Zoom	4x
Digital Zoom	4x
Image Processor	DIGIC 4
LCD Resolution	230, 000 dots
ISO Range	80 - 1600
Shutter Speed	15-1/2000 sec
Aperture Range	f/2.8-f/5.9
Battery	2x AA batteries
Lens	5.0-20.0mm f/2.8-5.9
Display	2.7-inch LCD
Viewfinder	Optical
Video Recording	720p HD
Focus Range	3 cm (1.2 in.) - infinity (W), 50 cm (1.6 ft.) - infinity (T)
Storage	SD/SDHC/SDXC
Weight	185g (including batteries)