Canon PowerShot A1200 User Manual

90
You can choose the subject you want to focus on and shoot.
Choose [Tracking AF].
z Press the n button to choose [AF
Frame] from the 4 tab, then press the qr
buttons to choose [Tracking AF].
X will appear in the center of the screen.
Choose the subject to focus on.
z Point the camera so that is on the
subject you want to focus on and press the
q button.
X The camera will beep and will appear
when a subject is detected. The camera
will continue to track the subject within a
certain range even if the subject moves.
X If the camera does not detect the subject,
will appear on the screen.
z To cancel tracking, press the q button
again.
Shoot.
z Press the shutter button halfway. will
change into a blue which will follow the
subject while the camera continues to
adjust the focus and exposure (Servo AF)
(p. 93).
z Press the shutter button fully to shoot.
X Even after shooting completes, will
appear, and the camera will continue to
track the subject.
Choosing the Subject to Focus On
(Tracking AF)
COPY

Canon PowerShot A1200 Specifications

General

Sensor	1/2.3-inch CCD
Optical Zoom	4x
Digital Zoom	4x
Image Processor	DIGIC 4
LCD Resolution	230, 000 dots
ISO Range	80 - 1600
Shutter Speed	15-1/2000 sec
Aperture Range	f/2.8-f/5.9
Battery	2x AA batteries
Lens	5.0-20.0mm f/2.8-5.9
Display	2.7-inch LCD
Viewfinder	Optical
Video Recording	720p HD
Focus Range	3 cm (1.2 in.) - infinity (W), 50 cm (1.6 ft.) - infinity (T)
Storage	SD/SDHC/SDXC
Weight	185g (including batteries)