Canon PowerShot A410 - Movie Shooting

35
Shooting
You can set the shutter to a 10 sec. ( ) or 2 sec. delay ( ), or to a
custom delay time and number of shots ( Custom Timer), for shooting
after the shutter button is pressed.
To Cancel the Self-Timer
FUNC. Menu / / (Self-Timer) (Single).
z Ensure that the camera’s date/time is set
beforehand (p. 25).
z The date stamp cannot be deleted from the image
data once it has been set.
Using the Self-Timer
Shooting Mode
1
FUNC. Menu * (Drive
Mode).
*Default setting.
zUse the W or X to select the self-
timer mode and press the FUNC./
SET button.
zThe following occurs with each
option.
- : 2 sec. before the shutter releases, the self-timer
sound and lamp will speed up.
- : The self-timer sound will play when the shutter button
is pressed and the shutter will release 2 sec. later.
-
: You can change the delay time and number of shots
(p. 36).
2
Shoot.
zWhen the shutter button is pressed fully, the self-timer lamp
will blink (when Red-Eye Reduction, it will lit before 2 sec.).