Automatic Gain Control (AGC) Limit
55
Automatic Gain Control (AGC) Limit
When recording in dark surroundings, the camcorder will automatically increase the gain to try to get a
brighter picture. However, using higher gain values may result in more noticeable video noise. You can
select the AGC limit to curb the amount of noise by setting the maximum gain value to be used. The
smaller the AGC limit, the picture will be darker but will have less the noise.
POINTS TO CHECK
• Select a recording program other than the Special Scene recording programs and
[y Manual Exposure].
1 Open the AGC limit adjustment screen.
[FUNC.] [P AGC Limit] [y Manual]
•Touch [z Automatic] to remove the AGC limit.
2Touch [y] or [A] to set the AGC limit.
• You can also drag your finger along the dial.
3Touch [a].
• The selected AGC limit will appear on the screen.
NOTES
•If you set 6 [Custom Key/Dial] to [P AGC Limit] (0 83), you can adjust the AGC limit with
the CUSTOM dial.
Operating modes:
To Next Page
Loading...
Need help?
General