Preparations 37
/ Selecting the Memory for the Recordings
You can select to record your movies and photos in the built-in mem-
ory or on a memory card. The built-in memory is the default memory
for recording both.
POINTS TO CHECK
•Be sure you understand the information provided in
Eye-Fi cards
( 35) before using an Eye-Fi card.
* When selecting the memory, you can check the total, used and approximate avail-
able recording time/number of photos (estimated based on the recording mode
(movies) or photo size/quality (photos) currently in use).
NOTES
• Select the built-in memory for recording movies if you intend to convert
high-definition scenes to standard definition for Web upload ( 124) or
creating standard DVDs ( 116).
Relay Recording
If the memory becomes full while you are recording a movie, relay
recording allows the camcorder to automatically continue recording on
to the memory card.
1 Insert a memory card that does not contain any movies.
2 Activate relay recording.
Operating modes:
Operating modes:
[ Menu]
[Rec Media for Movies] or [Rec Media for Photos]
Select the built-in memory or memory card*
FUNC.
FUNC.
To Next Page
Loading...
Need help?
General