Video 61
•The adjustment range and the length of the exposure adjustment
indicator will vary depending on the initial brightness of the picture.
• If you operate the zoom, the brightness of the image may change.
3 Adjust the ( ) the brightness of the image as required, then
hide ( ) the joystick guide.
•The exposure adjustment indicator will change to white and the
selected exposure will be locked.
•During exposure lock, press twice to return the camcorder to
automatic exposure.
NOTES
• If the recording program is changed during exposure lock, the cam-
corder will return to automatic exposure.
Manual Focus Adjustment
Autofocus may not work well on the following subjects. In such case,
focus manually.
* Available only for movies.
POINTS TO CHECK
•Adjus t the zoom before you start the procedure.
1 Open ( ) the joystick guide.
2 Select ( ) [ Focus] and press .
The current focus is locked and
[MF]
appears.
3 Push the joystick ( ) or ( ) once to
verify if the image is focused.
• Reflective surfaces
• Subjects with low contrast
or without vertical lines
• Fast moving subjects
• Through wet windows
• Night scenes
Operating modes:
*
Focus
To Next Page
Loading...
Need help?
General