Canon XL H1 User Manual

116
Recording Still Images on a Memory Card
You can record still images with the camcorder, from a tape in the camcorder. You can also record a still
image on the memory card while you record a movie on the tape.
1. Turn the POWER dial to a recording program and move the TAPE/CARD switch to .
2. Press the PHOTO button halfway.
• The symbol turns green once the focus is adjusted. The picture may appear out
of focus for a moment while the camcorder is focusing.
• While the PHOTO button is half-pressed you can also use the focusing ring to adjust
the focus.
• Exposure is locked.
• When you press the PHOTO button on the wireless controller, recording starts
immediately.
3. Press the PHOTO button fully.
• The symbol disappears.
• The CARD access indicator flashes and the card access display appears.
 Do not turn off the camcorder, change the position of the TAPE/CARD switch or the POWER dial,
open the memory card cover or remove the memory card while the CARD access indicator is
flashing. Doing so could result in data damage.
 When you are using an SD Memory Card, make sure that the protect switch is set to allow
recording.
TAPE/CARD switch
PHOTO button
Card access indicator

Canon XL H1 Specifications

General

Filter size	72 mm
Optical zoom	20 x
Image stabilizer	Yes
Focal length (35mm film equivalent)	38.9 - 778 mm
Sensor type	-
Total megapixels	1.67 MP
Effective megapixels (movie)	- MP
Focus	Auto/Manual
I/O ports	- IEEE1394 - EVF - SD in/out - S-Video - Headphone
Power consumption (typical)	7.8 W
Display diagonal	2.4 \
Maximum frame rate	25 fps
Camcorder tape type	Mini-DV
Compatible memory cards	MMC, SD
Firewire (IEEE 1394) ports	2
Product color	Black
Battery life (max)	5 h
Operating temperature (T-T)	0 - 40 °C

Weight and Dimensions

Depth	496 mm
Width	226 mm
Height	220 mm
Weight	3750 g