Canon XL H1 User Manual

118
Capturing a Still Image from a Tape
While you are playing back a tape, you can capture the same picture as a still image on the memory
card.
1. Open the menu and select [RECORDING SETUP]. Select [STILL I.REC], set it to [ON]
or [ON+CP DATA] and close the menu.
2. While you are playing back the tape, press the PHOTO button.
Screen Displays during Still Image Recording
MENU
( 31)
RECORDING SETUP STILL I. REC
•
OFF
Metering Method Icon
Indicates the metering mode currently selected for
recording still images.
Drive Mode Icon
Indicates the drive mode currently selected for
recording still images.
Remaining Card Capacity for Still Images
flashing in red: No card
in green: 6 or more images
in yellow: 1 to 5 images
in red: No more images
• The indication may not decrease even though a
recording has been made, or may decrease by 2
images at once.
• All indicators are displayed in green when a memory
card is played back.
“ ” Card Access Display
Indicates that the camcorder is writing on the memory
card.
Image Quality and Size
Indicates the quality and size currently selected for
recording still images.

Canon XL H1 Specifications

General

Filter size	72 mm
Optical zoom	20 x
Image stabilizer	Yes
Focal length (35mm film equivalent)	38.9 - 778 mm
Sensor type	-
Total megapixels	1.67 MP
Effective megapixels (movie)	- MP
Focus	Auto/Manual
I/O ports	- IEEE1394 - EVF - SD in/out - S-Video - Headphone
Power consumption (typical)	7.8 W
Display diagonal	2.4 \
Maximum frame rate	25 fps
Camcorder tape type	Mini-DV
Compatible memory cards	MMC, SD
Firewire (IEEE 1394) ports	2
Product color	Black
Battery life (max)	5 h
Operating temperature (T-T)	0 - 40 °C

Weight and Dimensions

Depth	496 mm
Width	226 mm
Height	220 mm
Weight	3750 g