Canon XL H1 User Manual

127
E
Using a Memory Card
Protecting Images
You can protect important images from accidental erasure when displaying a single image or the index
screen.
If a memory card is initialized, all still images, even protected ones, will be erased permanently.
1. Select the image you wish to protect.
2. Press the SET button to open the still image operations menu.
In mode, the menu appears when you press the SET button while you are reviewing a still
image, or if you press the SET button immediately after recording an image.
3. Select [ PROTECT].
“ ” appears and now the image cannot be erased.
Protecting during Index Screen Display
1. Move the zoom lever toward W.
• Up to 6 images appear.
• Select the image you wish to protect.
2. Open the menu and select [CARD OPERATIONS]. Select [ PROTECT] and press
the SET button.
• “ ” appears on the image.
• Select additional images with the SELECT dial and protect them in the same way.
3. Close the menu.
MENU
( 31)
CARD OPERATIONS PROTECT

Canon XL H1 Specifications

General

Filter size	72 mm
Optical zoom	20 x
Image stabilizer	Yes
Focal length (35mm film equivalent)	38.9 - 778 mm
Sensor type	-
Total megapixels	1.67 MP
Effective megapixels (movie)	- MP
Focus	Auto/Manual
I/O ports	- IEEE1394 - EVF - SD in/out - S-Video - Headphone
Power consumption (typical)	7.8 W
Display diagonal	2.4 \
Maximum frame rate	25 fps
Camcorder tape type	Mini-DV
Compatible memory cards	MMC, SD
Firewire (IEEE 1394) ports	2
Product color	Black
Battery life (max)	5 h
Operating temperature (T-T)	0 - 40 °C

Weight and Dimensions

Depth	496 mm
Width	226 mm
Height	220 mm
Weight	3750 g