Canon XL H1 User Manual

119
E
Using a Memory Card
Selecting the Drive Mode
Changing the Drive Mode
1. Set the POWER dial to a recording program other than and move the TAPE/CARD
switch to .
2. Press the DRIVE MODE button to switch between the drive modes.
The setting changes with each press of the button.
Continuous Shooting/High-Speed Continuous Shooting
Press and hold the PHOTO button.
A series of still images will be recorded as long as you hold the PHOTO button pressed down.
Maximum number of continuous shots at one time:
These figures are approximate and vary with the recording conditions and subjects.
Sufficient space on the memory card is required. Continuous shooting stops when card is full.
Continuous Shooting Captures a quick series of still images while you hold the PHOTO button
pressed down. For the number of frames per second, refer to the table
below.
High-Speed Continuous
AEB
(Auto Exposure Bracketing)
The camcorder records a still image in three different exposures (dark,
normal, light in 1/2 EV steps).
Single Records a single still image when you press the PHOTO button.
Still Image Size
Frames per Second Maximum Number of
Continuous Shots
Normal speed High speed
LW 1920 x 1080 3 frames 5 frames 30 images
SW 848 x 480 3 frames 5 frames 60 images
L 1440 x 1080 3 frames 5 frames 30 images
S 640 x 480 3 frames 5 frames 60 images
PHOTO button
DRIVE MODE
button

Canon XL H1 Specifications

General

Filter size	72 mm
Optical zoom	20 x
Image stabilizer	Yes
Focal length (35mm film equivalent)	38.9 - 778 mm
Sensor type	-
Total megapixels	1.67 MP
Effective megapixels (movie)	- MP
Focus	Auto/Manual
I/O ports	- IEEE1394 - EVF - SD in/out - S-Video - Headphone
Power consumption (typical)	7.8 W
Display diagonal	2.4 \
Maximum frame rate	25 fps
Camcorder tape type	Mini-DV
Compatible memory cards	MMC, SD
Firewire (IEEE 1394) ports	2
Product color	Black
Battery life (max)	5 h
Operating temperature (T-T)	0 - 40 °C

Weight and Dimensions

Depth	496 mm
Width	226 mm
Height	220 mm
Weight	3750 g