Canon ZR20 User Manual

70
E
Using the Full
Range of Features
You can also choose which type of data code to display — either the date/time,
camera data or both.
To change, open the menu and select DISP.SET UP. Then select DATA
CODE, set it to DATE/TIME, CAMERA DATA or CAM. & D/T and close
the menu.
DATA CODE•••DATE/TIME
DISP.SET UP
( 36)
Setting the data code
2
JAN. 1,2001
12:00:00 AM
12:00 AM
JAN. 1,2001
F32
1/250
F32
1/250
JAN. 1,2001
F32
1/250
12:00:00 AM
F32
1/250
12:00 AM
JAN. 1,2001
F32
1/250
F32
1/250
Date/Time Camera data
Date/Time &
Camera data
Time
Date & Time
Date
DATA CODE
D/TIME SEL.
Notes:
• The data code will read “– – –” in the following situations:
– During playback of a blank section of tape.
– If the tape was recorded before entering the date and time in the camcorder’s
memory.
– If the tape was recorded on a camcorder without a data code function.
– If noise or tape damage prevents the data code from being read.
• If a recording made on ZR20 is played back on a different DV camcorder, the
data code may not be displayed correctly.
• The data code will appear in the display even if DISPLAYS ( 104) has been
set to OFF through the menu.
Possible data code combinations:
PLAY
(VCR)
3_ZR20_E(35-73) 3/12/01 13:51 Page 70

Canon ZR20 Specifications

General

Brand	Canon
Model	ZR20
Category	Camcorder
Language	English