87
E
Editing
By using a DV cable and connecting the camcorder to a PC equipped with a DV
terminal conforming to IEEE 1394/DV compatible capture board, you can transfer
images taken with the camcorder to your PC.
• While connected, it is recommended that you power your camcorder from a
household power socket using the power adapter.
• Turn off the power of both the camcorder and the PC before connecting.
• Optional software necessary.
Note:
• Operation may not work correctly, depending on the software you are using,
and the specifications of your PC and its settings.
Connecting to a PC
DV Cable
(commercially available)
4_ZR20_E(74-87) 3/12/01 17:38 Page 87
To Next Page
Loading...
Need help?
General
