52
Adjusting the Focus Manually
Autofocus may not work well on the following subjects. In such case, focus manually.
1. Set the program selector to Q.
2. Adjust the zoom.
When you operate the zoom after adjusting the focus, the
subject may not stay in focus. Adjust the zoom before the focus.
3. Press the FOCUS button.
“MF” appears.
4. Turn the SET dial to adjust the focus.
• Turn the SET dial up or down until the image appears focused.
• Press the FOCUS button to return to autofocus.
PLAY (VCR)
CAMERA
FOCUS
Subjects with
Reflective surfaces low contrast or Fast Moving Subjects
Through dirty or
wet windows
without vertical lines
FOCUS button
Zoom lever
SET dial
Program selector
To Next Page
Loading...
Need help?
General
