14
ENG
easy/easy compact/easy split +030220791 - rel. 3.2 - 13.07.2010
3. USER INTERFACE AND START UP
3.1 easy
Display
1 7
2
3
4
5
6
Fig. 3.a
but.
no.
function normal operation start up
ON OFF ash
1 compressor on o call ON
2 fan on o call ON
3 defrost on o call ON
4 auxiliary output
(AUX)
output active output not
active
-ON
5 clock (RTC) RTC available,
enabled (tEN=1)
and at least one
time band has
been set
RTC not
available or
not enabled
(tEN=0) or no
time band set
ON (if the
clock is
tted)
6 alarm alarm in
progress
no alarm in
progress
-ON
7 digits three digits with decimal point and range -199 to 999. See
parameters /4, /5, /6 for the type of probe displayed, values
in °C/°F and decimal point
Table 3.a
Keypad (models C, S, X, Y)
2
1
3
Fig. 3.b
but.
no.
normal operation start up
pressing the button alone pressing with
other buttons
1 more than 3 s: switch ON/
OFF
pressed together
with 3 activates /
deactivates the
continuous cycle
-
2 - 1 s: displays/sets the set
point
- more than 3 s: accesses
the parameter setting menu
(enter password 22)
- mutes the audible alarm
(buzzer)
- for 1 s RESET
current EZY
set
pressed
together (2
and 3) activate
parameter
reset
procedure
3 more than 3 s: activates /
deactivates the defrost
pressed together
with 1 activates /
deactivates the
continuous cycle
for 1 s displays
rmware
version
Table 3.b
3.2 easy compact
Display
1
2
Fig. 3.c
but.
no.
function normal operation start up
ON OFF ash
1 compressor on o call ON
2 digits two digits with sign and decimal point, -99 to 99(*). See
parameters /4, /5, /6 for the type of probe displayed, values
in °C/°F and decimal point
Table 3.c
(*) The parameters that feature three digit values can be set from the
supervisor. In this case, the display will show “--” .
Keypad (model S)
2
1
3
Fig. 3.d
but.
no.
normal operation start up
pressing the button alone pressing with
other buttons
1 more than 3 s: switch ON/
OFF
pressed together
with 3 activates /
deactivates the
continuous cycle
-
2 - 1 s: displays/sets the set
point
- more than 3 s: accesses
the parameter setting menu
(enter password 22)
- mutes the audible alarm
(buzzer)
- for 1 s RESET
current EY set
pressed
together (2
and 3) activate
parameter
reset
procedure
3 more than 3 s: activates /
deactivates the defrost
pressed together
with 1 activates /
deactivates the
continuous cycle
for 1 s displays
rmware
version
Table 3.d
Keypad functions for easy and easy compact M models
(models with keypad only)
2
1
3
Fig. 3.e
but.
no.
normal operation start up
pressing the button alone
1 more than 3 s: switch ON/OFF -
2 - 1 s: displays/sets the set point
- more than 3 s: accesses the parameter
setting menu (enter password 22)
- mutes the audible alarm (buzzer)
- pressed together
activate parameter
reset procedure
3 rapid selection of probe displayed for 1 s
displays
rmware
version
Table 3.e