Controlling the Sound of a Performance
EN-27
A pedal (optional SP-3 or SP-20) can be used to apply various changes to your sound while playing.
Under initial default settings, sustain is assigned to the pedal, so it can be used as a damper pedal.
1.
While holding down FUNCTION, press the F6 keyboard key.
• Each press of the keyboard key sounds a tone that lets you know what setting was selected.
2.
Release FUNCTION to complete the setting operation.
Using a Pedal
Changing Pedal Functions
Notification Tone Setting Type Description
One tone Pedal sustain Playing notes while the pedal is depressed causes
the notes to be sustained, even if the keyboard keys
are released.
Two tones Sostenuto Playing notes and then pressing the pedal before
the keyboard keys are released causes the notes to
be sustained.
Three tones Soft Pressing the pedal and playing notes causes the
notes to be slightly softened.
Four tones Metronome Starts and stops the metronome.
C7
F6
To Next Page
Loading...
Need help?
General
