Casio Casiotone CT-S1 User Manual

Controlling the Sound of a Performance
EN-28
■ Disabling the Pedal Function Effect of Each Part
You can use the procedure below to disable the pedal function effect of the main part and layer part.
1. While holding down FUNCTION, press the G6 or A6 keyboard key.
This disables the pedal function effect.
• Each press of the keyboard key sounds a tone that lets you know what setting was selected.
High tone: On
Low tone: Off
The pedal function effect is applied to parts that are turned on, and not applied to parts that are
turned off.
2. Release FUNCTION to complete the setting operation.
• For details about parts, see “Layering Two Tones” (page EN-32).
While sustain is enabled, notes are sustained longer when keyboard keys are released.
1. While holding down FUNCTION, press the C6 keyboard key.
This enables sustain.
• Each press of the keyboard key sounds a tone that lets you know what setting was selected.
High tone: On
Low tone: Off
2. Release FUNCTION to complete the setting operation.
Sustaining Notes After Keyboard Keys Are Released
C2 C3 C4 C5 C6
C7
G6 (Main part)
A6 (Layer part)
C2 C3 C4 C5 C6
C7
C6
C
C
C6
C6

Casio Casiotone CT-S1 Specifications

General

Brand	Casio
Model	Casiotone CT-S1
Category	Synthesizer
Language	English