131
Viewing Snapshots and Movies
You can use the following procedures to delete images while playback is in progress
or paused.
. Deleting a Specific Group File
1. While CS image playback is in progress or paused, press [2].
This will display the “Edit Group” menu.
• In the case of an image shot with Intelligent Bracketing, press [2] while the
full-screen view of the image is shown.
2. Use [8] and [2] to select “Delete” and then press [SET].
3. Use [4] and [6] to display the image you want to delete.
4. Use [8] and [2] to select “Delete” and then press [SET].
• To delete other files, repeat steps 3 and 4.
• To exit the delete operation, press [MENU].
. Deleting Multiple Files in a Group
1. While CS image playback is in progress or paused, press [2].
This will display the “Edit Group” menu.
• In the case of an image shot with Intelligent Bracketing, press [2] while the
full-screen view of the image is shown.
2. Use [8] and [2] to select “Delete” and then press [SET].
3. Use [8] and [2] to select “Delete Frames” and then press [SET].
This displays a file selection screen.
4. Use [8], [2], [4], and [6] to move the selection boundary to the file
you want to delete, and then press [SET].
• This will select the check box in the lower left corner of the selected file’s image
and move the blue boundary to the next image.
• You can enlarge the selected image before deleting it by rotating the zoom
controller towards z ([).
5. Repeat step 4 to select other files, if you want. After you are finished
selecting files, press [MENU].
6. Use [8] and [2] to select “Yes” and then press [SET].
• This deletes the files you selected.
• To cancel the delete operation, select “No” in step 6 and then press [SET].
Deleting Continuous Shutter Images
To Next Page
Loading...
Need help?
General
