148
Other Settings (Set Up)
Other Settings (Set Up)
This section explains menu items that you can use to configure settings and perform
other operations in both the REC mode and PLAY mode.
Procedure
[MENU] * Set Up Tab * Screen
Procedure
[MENU] * Set Up Tab * Eye-Fi
Select “Off” to disable Eye-Fi card communication (page 143).
Procedure
[MENU] * Set Up Tab * Auto Rotate
The camera automatically detects whether a snapshot image was shot in portrait or
landscape orientation and displays it accordingly. Auto rotation is not performed for
movies.
For information about menu operations, see page 92.
Adjusting Monitor Screen Brightness (Screen)
Auto 2/
Auto 1
With this setting, the camera detects available light levels and
automatically adjusts the brightness of the monitor screen accordingly.
“Auto 2” changes monitor screen brightness relatively more quickly than
“Auto 1” when surrounding light is bright.
+2
Brightness that is greater than +1, which makes the screen easier to
view. This setting consumes more power.
+1 Bright setting for outdoor use, etc. Brightness that is greater than 0.
0 Normal monitor screen brightness for indoor use, etc.
Turning off Eye-Fi Card Communication (Eye-Fi)
Auto Image Orientation Detection and Rotation (Auto Rotate)
On
Automatically rotates snapshots shot with the camera held vertically 90
degrees.
Off Images not rotated automatically.
To Next Page
Loading...
Need help?
General
