45
Snapshot Tutorial
You can use the following procedure to change the Auto Focus metering area for
shooting snapshots.
• When recording movies, the AF metering area is always “
U
Spot”.
1. In the REC mode, press [8].
2. Use [8] and [2] to select the fourth control panel option from the
bottom (AF Area).
3. Use [4] and [6] to select the setting you want and then press [SET].
• “
O
Tracking” cannot be used in combination with the following features.
Prerecord CS, some BEST SHOT scenes (Move Out CS, Move In CS, Multi-
motion Image, Lag Correction, Expression CS, Baby CS, Child CS, Pet CS,
Sports CS)
•“— Free” cannot be selected for the AF area while Face Detection is enabled.
Specifying the Auto Focus Area (AF Area)
Spot
This mode takes readings of a small area in the center of the
image. This setting works well with focus lock (page 54).
Free
You can move the focus frame by using [8], [2], [4], and [6] to
move the focus point and then pressing [SET]. To change the focus
point position, select “— Free” again and then use [8], [2], [4]
and [6] to select the position you want.
Tracking
When you half-press the shutter button while this setting is
selected, the focus frame will follow the movement of the subject.
“
U
Spot” or “
O
Tracking”
Focus frame
*
[SET]
“— Free”
Focus point
Focus frame
To Next Page
Loading...
Need help?
General
