95
Advanced Settings
Procedure
[r] (REC) * [MENU] * REC Tab * AF Assist Light
Half-pressing the shutter button while this setting is
selected causes the front lamp to light, which provides
illumination for focusing in areas where lighting is dim.
Leaving this function turned off is recommended when
shooting portraits from short distances, etc.
IMPORTANT!
• Never look directly into the front lamp while it is lit.
• Make sure your finger is not covering the front lamp.
Procedure
[r] (REC) * [MENU] * REC Tab * Anti Shake
You can turn on the camera’s Anti Shake feature to reduce image blur due to subject
movement or camera movement when shooting a moving subject using telephoto,
when shooting a fast-moving subject, or when shooting under dim lighting conditions.
Using the Auto Focus Assist Light (AF Assist Light)
Reducing the Effects of Camera and Subject Movement
(Anti Shake)
Auto Minimizes the effects of camera and subject movement.
Camera AS Minimizes the effects of camera movement only.
Image AS Minimizes the effects of subject movement only.
DEMO
Half-pressing the shutter button demonstrates the effect of “
A
Camera AS”. However, the image is not recorded.
Off Turns off all Anti Shake settings.
Front lamp
To Next Page
Loading...
Need help?
General
